These are various documents I made or found during the course of this project. Left click on the thumbnails to open the item, right click to download and save.

This spreadsheet contains a detailed list of the wood needed for this project, other than the laser-cut ribs and formers. Dimensions are given for each piece, along with a description of where it will be used. The color coding of the 1/64th ply is coordinated with the layout diagram I made to get the most out of four 1/64" X 12" X 48" sheets. There is also a list of the raw wood lengths needed with on-line prices at the time from both Sig and Lone Star Balsa. I went with Lone Star and had no problems. There is a list of the number of Robart "Hinge Point" hinges and bellcranks needed. Finally, there is a list of costs for the project, not including hardware and finishing materials.

This graphic can be used to lay out, on 12" X 48" sheets, all of the 1/64th plywood panels needed. The colors are coordinated with the list in the spreadsheet above.

I used this three-view graphic as a guide for laying out panel lines.

I used this picture as a guide for painting the Sidewinder missiles.

These are a series of detailed drawings of the full-scale Sidewinder missile.

This is a brochure from Raytheon on the Sidewinder missile.

A cutaway graphic of the Maverick missile.

Another graphic of the Maverick missile.

Maverick missile specifications.

This is a brochure from Raytheon on the Maverick missile.

This is a brochure from Northrup Grumman on the
AN/ALQ-131 electronics countermeasures pod.

| A-10 GALLERY | A-10 PROJECT | MY GALLERY | BACK TO "POWERED MODEL AIRPLANES" | HOME |


Comments, questions, etc., send me a note.